Installing tiles is not an easy thing to do, especially for beginners. Ceramic floors that are installed with the right technique will produce a beautiful floor that is easy to clean.
One of the ceramic floors that produce a beautiful floor is Sukabumi tiles. You can learn to lay tiles manually.
There are some preparations and tips that you should follow. This article will give you tips and equipment that must be prepared to install ceramic floors.
Tile Installation For Beginners
There are several methods you can do in laying tiles. Because every tile in the house must be different. Such as bathroom tiles, floor tiles, and wall tiles.
Laying the tiles will take several days to complete. You can do the whole process yourself with the following preparations:
- Prepare Equipment
The first thing you have to prepare is the tiling equipment. Starting from mixing paddles, screws, mortars, drills, mortars, and so on.
You will use these tools to cut tiles, lay tiles, paste tiles and draw precise lines for laying tiles.
- Cut The Tiles According To The Floor Size
If you want to create a beautiful floor, you can start by cutting the tiles and adjusting to the size of the floor.
You can spread the thinset to get the right tile size. Sukabumi tiles will produce a beautiful floor appearance if installed with the right technique and size.
- Create a Thinset To Install Tiles
After that, you can mix the thin-set and get the right consistency. Spread the thinset over the entire floor.
- Apply Tile Membrane
This method is useful so that you can install the exact tile with the size that was previously made. Waterproof on the membrane layer
- Create a Starting Point
The next step is for you to create a starting point for tiling. Measure two walls and draw a line in the middle. Then mark the point where the tiles will be laid.
- Install Tiles
After creating the relief lines and mounting points, you can then lay the tiles. Make sure there are gaps on the sides of the tile.
Keep the color of the tiles consistent and show curiosity. Pay attention to each end of the tile so you can keep the color consistent.
- Prepare Mortar
You can prepare the mortar and make sure the tiles are well laid. Place the tiles following the relief lines you have created.
Press the tile so that it is fully bonded with the mortar. Grease the tile with mortar so that it sticks perfectly.
- Clean Tiles
After completion of installation, the tiles will be dirty due to being exposed to mortar. You can clean it and wait for it to dry.
Those are some steps to install Green Sukabumi tiles for beginners. Of course, you can try it yourself at home because the equipment is also quite simple.
Take into account your tile needs with your floor area so that you can install the tiles correctly and produce a beautiful floor.